Skip to main content

Changes to Step #1

Edit by Sarah

Edit approved by Sarah

Before
After
Unchanged

Step Lines

[* black] Lift the bottom body away from the core.
[* icon_note] Remove sticker: sticker is not required for reassembly
[* black] Press up on the clip like a latch. Move to the far end to undo the other clip.
-[* black] Push spudger into crevice
+[* black] Push the spudger into the crevice. Slide the spudger along the vertical crevice until the bottom body pops off.
[* black] Slide the spudger along the vertical crevice until bottom body pops off