Skip to main content

Changes to Step #1

Edit by Sarah

Edit approved by Sarah

Before
After
Unchanged

Step Lines

[* black] Lift the bottom body away from the core.
[* icon_note] Remove sticker: sticker is not required for reassembly
-[* black] Press up on clip like a latch. Move to far end to undo the other clip
+[* black] Press up on the clip like a latch. Move to the far end to undo the other clip.
[* black] Push spudger into crevice
[* black] Slide the spudger along the vertical crevice until bottom body pops off