Skip to main content

Changes to Step #4

Edit by Adam McCuistion

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove all 7 screws:
[* black] Hold the camera firmly with one hand so that you can still see a screw
- [* black] Place the Philips 00 screwdriver into the screw.
+ [* black] Place the Philips 00([http://www.ifixit.com/Tools/Phillips-00-Screwdriver/IF145-006|Found here])screwdriver into the screw.
[* black] Turn the screwdriver to the left until it is free.
[* black] Repeat for the remaining screws.