Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Kishan Patel

Edit approved by Kishan Patel

Before
After
Unchanged

Step Lines

[* icon_caution] Replace a fuse only with a fuse identical in type, voltage rating, and current rating as specified by the back panel fuse labelrating label or the [http://assets.fluke.com/manuals/77iii___smeng0100.pdf|Fluke 77 Series III Service Manual]. Inserting the wrong replacement fuse could create a fire hazard.
[* icon_caution] Replace a fuse only with a fuse identical in type, voltage rating, and current rating as specified by the back panel fuse labelrating label or the [http://assets.fluke.com/manuals/77iii___smeng0100.pdf|Fluke 77 Series III Service Manual]. Inserting the wrong replacement fuse could create a fire hazard.
[* black] Locate the fuses near the bottom left corner inside the device.
[* icon_noteicon_reminder] Take note of which fuses belong in which location before removal. They are '''NOT''' interchangeable.
[* icon_noteicon_reminder] Take note of which fuses belong in which location before removal. They are '''NOT''' interchangeable.
[* red] The .440 Amp fuse is located in the upper left hand fuse holder.
[* orange] The 11 Amp fuse is located below and to the right of the .440 Amp fuse.
[* black] Lift the rounded edge of the fuse with one finger until that side is completely out of its holder.