Skip to main content

Changes to Step #2

Edit by Maaz Hussaini

Edit approved by Maaz Hussaini

Before
After
Unchanged

Step Lines

-[* black] Pinch the left shoulder of the controller to introduce an opening. Wedge a plastic opening tool into the opening and slide it up towards the joystick. Pull down on the plier to crack open the casing.
-[* black] Repeat these steps for the right shoulder.
+[* black] Beginning with the ***left shoulder***:
+ [* black] Pinch the left shoulder of the controller to introduce an opening.
+ [* black] Wedge a plastic opening tool into the opening and slide it up towards the joystick.
+ [* black] Pull down on the plier to crack open the casing.
+[* black] Repeat these steps for the ***right shoulder***.