Skip to main content

Changes to Step #2

Edit by Bijan Vakilifathi

Edit approved by Bijan Vakilifathi

Before
After
Unchanged

Step Lines

-[* black] Pinch the left shoulder of the controller to introduce an opening. Wedge a plastic opening tool into the opening, and slide it up towards the joystick. Pull down on the plier to crack open the casing.
+[* black] Pinch the left shoulder of the controller to introduce an opening. Wedge a plastic opening tool into the opening and slide it up towards the joystick. Pull down on the plier to crack open the casing.
[* black] Repeat these steps for the right shoulder.