Skip to main content

Changes to Step #2

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Removeblack] Remove the four T3 Torxfollowing screws securing the logic board to the rear case.
[* red] Two 4.56 mm T4 screws.
[* orange] Two 3.76 mm T4 screws.
[* red] Removeblack] Remove the four T3 Torxfollowing screws securing the logic board to the rear case.
[* red] Two 4.56 mm T4 screws.
[* orange] Two 3.76 mm T4 screws.

Image 1

Old Version

New Version