Skip to main content

Changes to Step #1

Edit by David Hodson

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use the edge of an iPoda plastic opening tool to:
[* black] Use the edge of an iPoda plastic opening tool to:
[* red] Pry the side button connector up off the logic board from underneath the wires.
[* orange] Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.
[* black] Carefully flip up the ZIF ribbon cable retaining flap on the socket near the headphone jack.
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itself.
[* black] Pull the headphone jack ribbon cable toward the left side of the iPad to disconnect it from its socket.