Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use the edge of an iPod opening tool to:
[* blackred] Pry the side button connector up off the logic board from underneath the wires.
[* blackorange] Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.
[* blackred] Pry the side button connector up off the logic board from underneath the wires.
[* blackorange] Pry the speaker connector up off its socket on the logic board from beneath the speaker wires.
[* black] Carefully flip up the ZIF ribbon cable retaining flap on the socket near the headphone jack.
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itself.
[* black] Pull the headphone jack ribbon cable toward the left side of the iPad to disconnect it from its socket.

Image 1

Old Version

New Version

Image 2

Old Version

New Version