Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by jimmy5

Edit declined by Andrew W.

Before
After
Unchanged

Step Lines

[* black] Remove the two screws securing the upper component bracket:
[* red] 4.0 mm Phillips #000
[* orange] 2.3 mm Phillips #000
[* icon_caution] It is imperative that the right screws arebe inserted into their respective holes. Otherwise it may cause severe damage to the LCD during reassembly.
[* icon_caution] It is imperative that the right screws arebe inserted into their respective holes. Otherwise it may cause severe damage to the LCD during reassembly.