Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

[* black] Remove the two screws securing the upper component bracket:
[* red] 4.0 mm Phillips #000
[* orange] 2.3 mm Phillips #000 (Be careful when reassembling!!!!, if you insert
[* icon_caution] It is imperative that
the 4.0 mm screw instead of this one,right screws are inserted into their respective holes. Otherwise it may cause severe damage to the LCD will get damaged)during reassembly.
[* orange] 2.3 mm Phillips #000 (Be careful when reassembling!!!!, if you insert
[* icon_caution] It is imperative that
the 4.0 mm screw instead of this one,right screws are inserted into their respective holes. Otherwise it may cause severe damage to the LCD will get damaged)during reassembly.