Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #17

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] The iPad 3G has a black plastic strip along the top edge of the rear case for transmission of signals. The large black plastic piece at the top of this picture is the 3G antenna assembly.
[* black] The odd looking structure boxed in red is what the 3G chip and possibly the logic board are fastened to. It is [link|http://en.wikipedia.org/wiki/Resistance_welding|resistance welded] to the rear case and probably serves as a ground point for the boards attached to it.

Image 1

Old Version

New Version