Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #4

Edit by KaylaYoung

Pending approval

Before
After
Unchanged

Step Lines

[* icon_caution] Be Extremely Careful in this next step as if you pry the hinge off too fast you may rip the connector between the logic board and screen.
[* black] Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlitedhighlighted area in picture twoone. (be sure to insert the wedge into the right hinge when looking down onto the phonephone, as in the picture).
[* black] Slowly pry the hinge off the body as shown being done in the thirdsecond picture and set the phone down when you get toafter done with this step.
[* black] Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body. (PICTURE)
[* black] Carefully wedge a plastic opening tool between the hinge on the body as shown in the highlitedhighlighted area in picture twoone. (be sure to insert the wedge into the right hinge when looking down onto the phonephone, as in the picture).
[* black] Slowly pry the hinge off the body as shown being done in the thirdsecond picture and set the phone down when you get toafter done with this step.
[* black] Next slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body. (PICTURE)