Skip to main content

Changes to Step #9

Edit by Reed Crosby

Edit approved by Reed Crosby

Deleted
Added
Unchanged

Step Lines

[*title] LCD Screws
[*
black] Close the screen of the laptop completely.
[* black
screen completely, make sure it clips in place.
[* icon_caution
] Make sure theno cables do not get damaged by the LCD screen or the logic board.
[* black] With a screwdriver, remove the two screws that are circled
parts get caught in the picturehinge.
[* green] The bottom screw is labeled with a "D"D, remove it.
[* blue] The screw on the rear is not labeled, remove it as well.
[* icon_note] Rinse and repeat for both sides of the laptop
.
[*title] LCD Screws
[*
black] Close the screen of the laptop completely.
[* black
screen completely, make sure it clips in place.
[* icon_caution
] Make sure theno cables do not get damaged by the LCD screen or the logic board.
[* black] With a screwdriver, remove the two screws that are circled
parts get caught in the picturehinge.
[* green] The bottom screw is labeled with a "D"D, remove it.
[* blue] The screw on the rear is not labeled, remove it as well.
[* icon_note] Rinse and repeat for both sides of the laptop
.