Skip to main content

Changes to Step #5

Edit by Elizabeth Zapata

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] With the logic board exposed using a plastic pry tool or guitar pic unhook the flex cable clips and the 2 antennas
+[* black] With the logic board exposed using a plastic pry tool or guitar pic unhook the flex cable clips, and the 2 antennas.
[* green] Start with the battery connector.
[* yellow] Camera & Volume keys
[* red] Front camera & Prox. Sensor/LED
[* orange] Digitizer
- [* violet] 2 antenna wires (NOTE: these antenna and flex connectors are heavy duty compared to other phones I've worked on)
+ [* violet] 2 antenna wires (NOTE: these antenna, and flex connectors are heavy duty compared to other phones I've worked on)
[* blue] 2 flex cables joining the bottom board to the logic board