Skip to main content

Changes to Step #5

Edit by danielelliott1

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] With the logic board exposed using a plastic pry tool or guitar pic unhook the flex cable clips and the 2 antennas
[* green] Start with the battery connector.
[* yellow] Camera & Volume keys
[* red] Front camera & Prox. Sensor/LED
[* orange] Digitizer
[* violet] 2 antenna wires (NOTE: these antenna and flex connectors are heavy duty compared to other phones I've worked on)
- [* blue] I'm actually not sure what they are for
+ [* blue] 2 flex cables joining the bottom board to the logic board