Skip to main content

Changes to Step #5

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] With the logic board exposed using a plastic pry tool or guitar pic unhook the flex cable clips and the 2 antennas START with Green - Battery
- [* black] Yellow - Camera & Volume keys
- [* black] Red - Front camera & Prox. Sensor/LED
- [* black] Orange - Digitizer
- [* black] Purple - 2 antenna wires (NOTE: these antenna and flex connectors are heavy duty compared to other phones ive worked on)
- [* black] Blue - Im actually not sure what they are for
+[* black] With the logic board exposed using a plastic pry tool or guitar pic unhook the flex cable clips and the 2 antennas
+ [* green] Start with the battery connector.
+ [* yellow] Camera & Volume keys
+ [* red] Front camera & Prox. Sensor/LED
+ [* orange] Digitizer
+ [* violet] 2 antenna wires (NOTE: these antenna and flex connectors are heavy duty compared to other phones I've worked on)
+ [* blue] I'm actually not sure what they are for