Skip to main content

Changes to Step #4

Edit by Nicolas Siemsen

Edit approved by Nicolas Siemsen

Deleted
Added
Unchanged

Step Lines

[* black] Using a flat-blade screwdriver or other appropriate tool, pry the cover off the back of the gear housing and set it aside.
[* black] There is a plastic gasket between the housing and the cover, so you'll want to watch for that and set it aside with the cover.
[* black] With the cover removed you'll see:
[* blue] The worm gear that the electric motor turns and,
[* orange] The main gear the turns the outer gear which then moves the regulator

Image 2

No previous image

Added