Skip to main content

Changes to Step #13

Edit by Angela Penaherrera

Edit approved by Angela Penaherrera

Deleted
Added
Unchanged

Step Lines

[* black] Put small bits of super glue on the borders of the enclosures. Place the other face of the plastic enclosure and close up the AC charger.
[* black] Put small bits of super glue on the borders of the enclosures. Place the other face of the plastic enclosure and close up the AC charger.
[* icon_caution] Don't forget the plastic tabs that let you wrap your cable on the charger... Even though those are the main cause for your cable tearing up! I usually choose to leave them out or glue them to the enclosure to prevent the cable breaking again.