Skip to main content

Changes to Step #12

Edit by Angela Penaherrera

Edit approved by Angela Penaherrera

Deleted
Added
Unchanged

Step Lines

[* black] Cover up with electrical tape the rest the white and black/outer cable you just soldered.
[* black] Join them together with electrical tape as to form one cable and place the AC charger in one of the faces of the plastic enclosure.
[* black] Take 3 small plastic zipperszip ties and puttie them around the cable to stop it from being pulled out of the plastic enclosure.
[* black] Take 3 small plastic zipperszip ties and puttie them around the cable to stop it from being pulled out of the plastic enclosure.