Skip to main content

Changes to Step #11

Edit by Angela Penaherrera

Edit approved by Angela Penaherrera

Deleted
Added
Unchanged

Step Lines

[* black] Proceed to solder the black cable from the AC charger to the outer cable that goes towire from your MacbookMacbook connector.
[* black] Isolate that cablewire. You don't need to cover up the whole extension of the outer cablewire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.
[* icon_note] You can use the black rubber tube or isolating electrical electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.
[* black] Proceed to solder the black cable from the AC charger to the outer cable that goes towire from your MacbookMacbook connector.
[* black] Isolate that cablewire. You don't need to cover up the whole extension of the outer cablewire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.
[* icon_note] You can use the black rubber tube or isolating electrical electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.