Skip to main content

Changes to Step #10

Edit by Angela Penaherrera

Edit approved by Angela Penaherrera

Deleted
Added
Unchanged

Step Lines

[* blackblue] Join both white cable wires and solder them together.
[* blackblue] Join both white cable wires and solder them together.
[* icon_caution] Remember that the white cable from the AC adapter NEEDS to be soldered to the white cable from the chord that comes from the MacBook connector.
[* black] The black insulated cover tube on the cable is to isolate the cable later, you can use heat to shrink it.
[* icon_noteviolet] The last pic shows the black insulated cover tube, you can cut it up to fit the length you need.
[* icon_noteviolet] The last pic shows the black insulated cover tube, you can cut it up to fit the length you need.
[* icon_caution] It is very important to isolate both wires, they cannot touch each other or else they will short circuit (in other words: Kaboom!).

Image 1

Old Version

New Version

Image 3

Old Version

New Version