Skip to main content

Changes to Step #6

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Remove the following screws from the logic board:
[* red] One 2.4 mm PHPhillips #000 screw
[* orange] Two 2.3 mm PHPhillips #000 screws
[* red] One 2.4 mm PHPhillips #000 screw
[* orange] Two 2.3 mm PHPhillips #000 screws
[* yellow] Four 2.8 mm standoff screws
[* icon_note] Use a small flathead screwdriver to remove these standoff screws.