Skip to main content

Changes to Step #3

Edit by Nathan Holder

Pending approval

Before
After
Unchanged

Step Lines

[* black] Pull the cooling/processing unit straight up to prevent damage to logic board
[* icon_note] This will require some effort and should be done with caution to avoid damage.
+[* black] The sleeves around the 6 screws may hold it in, if so just take a pair of needle nose pliers and gently squeeze until it releases.
+[* black] Pull the bottom, the side towards the bottom of the cpu case, first to move around the bottom coolant sleeve around the heat sinking bracket. *heat sinking bracket not in picture*