Skip to main content

Changes to Step #2

Edit by charles morales

Edit approved by Nick

Before
After
Unchanged

Step Lines

-[* red] Unscrew 8 T10 screws from the cooling unit. G5 models with the large Fujikura heat sinks (not shown in picture) will have 8 2.5mm hex screws.
+[* red] Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.
[* icon_note] The screws are somewhat hidden, so they cannot be see in the picture.
[* icon_note] To visualize the location of the screws look 3 steps ahead.
[* black] The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.