Skip to main content

Changes to Step #6

Edit by Colin Mitchell

Edit approved by Colin Mitchell

Deleted
Added
Unchanged

Step Lines

[* black] Insert the metal screwdriver as pictured: oriented vertically, underneath the yellow plastic piece in the switch assembly, between the metal contact of the switch and the gray plastic slider flange.
[* black] Pry upward to remove the yellow plastic piece; the metal contact piece may pop out with the plastic piece.
[* black] Once the metal and plastic are unseated from one side, pull out the metal contact and yellow plastic piece with pliers or fingers. Remove these pieces.

Image 1

No previous image

Added