Skip to main content

Changes to Step #7

Edit by iRobot

Edit approved by iRobot

Deleted
Added
Unchanged

Step Lines

[* black] Align the patch with the baffle, exactly as you want it to appear when you are done.
[* black] Slide the garment into the sewing machine, repositioning the patch if necessary.
[* icon_note] To prevent the insulation from leaking through the stitches, fir your sewing machine with the smallest needle available.
[* black] Sink the needle to hold the patch into place.
[* icon_note] Do not pin the patch, as this will create unnecessary holes where down can escape.
[* black] Holding the patch in place sew directly over the edge of your patch.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added