Skip to main content

Changes to Step #5

Edit by Roxanne

Edit approved by Roxanne

Deleted
Added
Unchanged

Step Lines

[* blackred] Using the Philips Head 2 screwdriver, unscrew the two 1/2” (1/4” diam) screws that were underneigh the rubber feet
[* blackorange] Use the same screwdriver to unscrew the 5/8” (3/16” diam) screw from the back of the chopper
[* blackred] Using the Philips Head 2 screwdriver, unscrew the two 1/2” (1/4” diam) screws that were underneigh the rubber feet
[* blackorange] Use the same screwdriver to unscrew the 5/8” (3/16” diam) screw from the back of the chopper

Image 1

No previous image

Added

Image 2

No previous image

Added