Skip to main content

Changes to Step #4

Edit by David Otsu

Edit approved by David Otsu

Deleted
Added
Unchanged

Step Lines

[* black] Remove the two rubber feet from the frontbottom of the choppercontainer
[* black] Using the Philips Head 2 screwdriver, unscrewicon_note] The two 1/2” (1/4” diam) screwsfeet furthest from the front and one 5/8” (3/16” diam) screw from the back of the chopperbutton tower contain screws. The other two feet do not.
[* black] Remove the two rubber feet from the frontbottom of the choppercontainer
[* black] Using the Philips Head 2 screwdriver, unscrewicon_note] The two 1/2” (1/4” diam) screwsfeet furthest from the front and one 5/8” (3/16” diam) screw from the back of the chopperbutton tower contain screws. The other two feet do not.