Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Angela

Pending approval

Before
After
Unchanged

Step Lines

[* black] Flip the iPhone back over and insert a plastic card between the case side of the battery and the rear case.
[* black] Do not pry against the logic board or you may damage the phone.
[* icon_caution] Be careful to keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. DO NOT use any sharp or metal tools to remove the battery. If punctured, the battery can catch fire or explode.
[* icon_caution] Be careful to keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. DO NOT use any sharp or metal tools to remove the battery. If punctured, the battery can catch fire or explode.
[* black] Press the card in farther to break up the adhesive behind the battery.
[* icon_note] A piece of dental floss may be used to work between the battery and adhesive strip. A stronger alternative to dental floss, which may break, is an unwound guitar string, such as a 0.009 E string from a 12-string set. Thread around upper battery corners, bring ends together, wrap around a folded cloth, and pull evenly.