Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by mashton27

Edit approved by mashton27

Deleted
Added
Unchanged

Step Lines

[* red] Remove the four 12mm Phillipsphillips head #2 screws onlocated along the outer edge of the white case.
[* red] Remove the four 12mm Phillipsphillips head #2 screws onlocated along the outer edge of the white case.
[* icon_caution] Be careful! There are two small, easily-broken, plastic tabs at the bottom of the device keeping it together.
[* black] Once you remove the screws, pick the device up so that the grey label on the bottom of the device faces toward you.
[* black] With your thumbs on either side of the grey label, slowly push with both thumbs until the case pops open.
[* icon_note] A small gap will open as the two tabs are released.
[* icon_caution] Do not pull the two halves apart yet. They are held together by the speaker wire.