Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by mashton27

Edit approved by mashton27

Deleted
Added
Unchanged

Step Lines

[* red] Remove the four 12mm Phillips #2 screws on the outer edge of the white case.
[* icon_caution] Be careful! There are two small, fragileeasily-broken, plastic tabs at the bottom of the device keeping it together that are easily brokentogether.
[* black] Once you removedremove the screws, pick the device up so that the grey label on the bottom of the device is on the upper half facing towardsfaces toward you.
[* icon_caution] Be careful! There are two small, fragileeasily-broken, plastic tabs at the bottom of the device keeping it together that are easily brokentogether.
[* black] Once you removedremove the screws, pick the device up so that the grey label on the bottom of the device is on the upper half facing towardsfaces toward you.
[* black] With your thumbs on either side of the grey label, slowly push with both thumbs until the case pops open.
[* icon_note] A small gap will open as the two tabs are released.
[* icon_caution] TheDo not pull the two halves apart yet. They are held together by the speaker wire, so do not pull them apart yetwire.
[* icon_caution] TheDo not pull the two halves apart yet. They are held together by the speaker wire, so do not pull them apart yetwire.