Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Melissa Pasa

Edit approved by Melissa Pasa

Deleted
Added
Unchanged

Step Lines

[* red] Remove four 12mm PH2 Phillips screws on the outer edge of the white case.
[* red] Remove four 12mm PH2 Phillips screws on the outer edge of the white case.
[* icon_caution] Be careful! There are two small, fragile, plastic tabs on the inside at the bottom of the device keeping it together that are subject to breakage.
[* black] Once screws are removed pick the device up and slowlysuch that the bottom grey label is on the upper half facing towards you. Slowly apply force to the bottom of the case.
[* black] Once screws are removed pick the device up and slowlysuch that the bottom grey label is on the upper half facing towards you. Slowly apply force to the bottom of the case.
[* icon_note] A small gap will open as the two tabs are released