Skip to main content

Changes to Step #13

Edit by Andrew Bookholt

Pending approval


Step Lines

-[* black] Insert wisdom here.
+[* black] Now that the lower edge of the board is free from the outer case, rotate the logic board toward yourself to expose its rear face.
+[* icon_caution] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components.
+[* black] Carefully pull the optical drive connector away from its socket on the logic board.
+[* icon_note] Pull the connector perpendicular to the face of the logic board.