Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #16

Edit by Sebastian

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socketsocket or the board itself, you may breakdestroy the socket or damage nearby components on the connector entirelyboard.
[* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socketsocket or the board itself, you may breakdestroy the socket or damage nearby components on the connector entirelyboard.