Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #16

Edit by Jonathan Pegues

Edit declined by Adam O'Camb


Step Lines

[* black] Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector itself and not the socket on the logic board. If you pry up on the logic board socket or the board itself, you may destroy the socket or damage nearby components on the board.
[* icon_caution] There are Components directly in between the battery connector and the shield that if knocked off will cause the phone to boot-loop. Do not go to deep when prying up the connector.

Image 3

No previous image