Skip to main content

Changes to Step #3

Edit by Mark

Edit approved by Mark

Deleted
Added
Unchanged

Step Lines

[* black] Next we need to remove the '''hard drive''', '''DVD drive''' and '''wireless card'''
[* red] There are 4 standard-sized screws holding the hard drive in its mount
[* orange] The screw that is holding the DVD drive in the case is slightly smaller than the standard screw
[* yellow] There are two screws holding in the wireless card. Remove them and it will easily come out. Also remove the '''white and black antenna cables''' from the card
[* black] When the hard drive mount is removed, pull the hard drive cable away from the hard drive connectors. May take some wiggling.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added