Changes to Step #7
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the battery and its sleeve. | |
| [* icon_reminder] During reassembly: | |
| - | [* black] If you're reusing |
| + | [* black] If you're reusing the original battery: |
| [* icon_caution] ''***Never reuse a damaged or deformed battery***''—it's a potential safety hazard. If the battery is bent, deformed, or damaged ''in any way'', replace it with a new battery. | |
| [* black] If the plastic battery sleeve was damaged during removal, ''carefully'' remove it—be very cautious not to bend or damage the battery in any way. Apply a new sleeve to the battery, making sure the tabs go on the left edge. | |
| [* black] Remove the [link|https://guide-images.cdn.ifixit.com/igi/F52p2C5HEAqiaddf.full|two large plastic liners|new_window=true] from the outer edges of the battery recess to expose the adhesive. | |
| [* black] Firmly press the battery into its recess so the cable is on the top edge. |