Changes to Step #7
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the battery and its sleeve. | |
| [* icon_reminder] During reassembly: | |
| - | [* icon_caution] If you're reusing your original battery, carefully check it for signs of damage. If the battery is bent, deformed, or damaged in any way, replace it with a new battery. |
| - | [* black] PLASTIC SLEEVE REPLACEMENT |
| - | [* black] Remove the [link|https://guide-images.cdn.ifixit.com/igi/F52p2C5HEAqiaddf.full|two large, plastic liners|new_window=true] from the outer edges of the battery recess. |
| - | [* black] Firmly press the battery into place top secure it with the adhesive. |
| + | [* black] If you're reusing your original battery: |
| + | [* icon_caution] Carefully check for signs of damage. If the battery is bent, deformed, or damaged ''in any way'', replace it with a new battery. |
| + | [* black] If the plastic battery sleeve was damaged during removal, carefully remove it and apply a new one. |
| + | [* black] Remove the [link|https://guide-images.cdn.ifixit.com/igi/F52p2C5HEAqiaddf.full|two large plastic liners|new_window=true] from the outer edges of the battery recess to expose the adhesive. |
| + | [* black] Firmly press the battery into its recess so the cable is on the top edge and the three tabs are on the left edge. |