Changes to Step #6
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| [title] Remove the front cover | |
| [* black] Lift the front cover off the screen and remove it. | |
| [* icon_reminder] During reassembly: | |
| - | [* black] If your replacement front cover comes with [link|https://guide-images.cdn.ifixit.com/igi/mWsnJIJTiOAF3Qgh.full|pre‑installed adhesive|new_window=true], remove the liner. Otherwise, use a thin double-sided tape like [product|IF317-072|Tesa tape|new_window=true] to replace the adhesive. |
| + | [* black] If your replacement front cover comes with [link|https://guide-images.cdn.ifixit.com/igi/mWsnJIJTiOAF3Qgh.full|pre‑installed adhesive|new_window=true], remove the liner. Otherwise, use a thin double-sided tape like [product|IF317-072-6|Tesa tape|new_window=true] to replace the adhesive. |
| [* black] Align the front cover over the frame and press down around the perimeter until the clips snap back into place. |