Skip to main content

Changes to Step #1

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

+[* black] Peel up the six cable loops securing the antenna cables to the upper case. .
+[* black] Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.
+[* black] Use your spudger to open up the plastic loops as you de-route the antenna cables through them.
+[* black] Repeat this for all of the retaining loops

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added