Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Sam Goldheart

Edit approved by Sam Goldheart


Step Lines

[* icon_caution] In this step you will disconnect the battery to help avoid shorting out any components during service.
[* black] Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.
[* black] Bend the battery cable slightly away from the logic board so the connector will not accidentally contact its socket.

Image 1

No previous image


Image 2

No previous image