Skip to main content

Changes to Step #13

Edit by mayer

Edit approved by mayer

Before
After
Unchanged

Step Lines

-[* red] Remove the six 4.4 mm T6 Torx screws securing the logic board to the upper case.
-[* orange] Remove the two 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.
+[* red] Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.
+[* orange] Remove the two 4.1 to 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.