Skip to main content

Changes to Step #6

Edit by airshack

Edit declined by Jake Devincenzi

Before
After
Unchanged

Step Lines

-[* black] Use a spudger to pry the right speaker connector and sleep LED connector up off the logic board.
-[* icon_caution] These connectors are very delicate and easily broken.
+[* black] Use a small flathead screwdriver or pinhead to pry the right speaker connector and sleep LED connector up off the logic board.
+[* icon_caution] These connectors are very delicate and easily broken. USING THE SPUDGER TOOL ON THIS SMALL CONNECTOR IS LIKELY TO BREAK THE CONNECTOR.