Skip to main content

Changes to Step #4

Edit by airshack

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

-[* black] Use the flat end of a spudger to pry the rear speaker connector up off the logic board.
-[* icon_caution] This connector is very delicate and easily broken.
+[* black] Carefully pry the delicate rear speaker connector up off the logic board. These small L/R speaker connectors are quite easily broken.
+[* icon_caution] This connector is easily destroyed. Consideration should be given to using a small flathead screwdriver or small pinhead to remove this connector in particular. USING THE SPUGER (as depicted) IS LIKELY TO BREAK THIS CONNECTOR.