Skip to main content

Changes to Step #4

Edit by Peterb

Edit declined by David Hodson

Before
After
Unchanged

Step Lines

-[* black] Use the flat end of a spudger to pry the rear speaker connector up off the logic board.
+[* black] Use the flat end of a spudger to pry the rear speaker connector up off the logic board. Better is to take 2 needles and put them in the small connector holes on top and carefully to lift it up slowly. Breaking them will happen when you do it like displayed on the photo
[* icon_caution] This connector is very delicate and easily broken.