Fix Your Stuff Community Store

Changes to Step #1

Edit by Alex Diaz-Kokaisl —

Edit approved by Alex Diaz-Kokaisl

Before
After
Unchanged

Step Lines

[title] Remove the old adhesive from the frame
[* icon_note] In order for the new adhesive to properly seal, you must remove ***all*** the old adhesive ''and its residue''.
[* black] Use the flat end of a spudger to scrape up and remove all the old adhesive from the frame.
-[* black] Use isopropyl alcohol (>90%) and a lint-free cloth to remove any remaining adhesive residue.
+ [* icon_note] If you're having trouble, apply a few drops of highly-concentrated (greater than 90%) isopropyl alcohol to the adhesive and scrape it up.