Changes to Step #1
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove the old adhesive from the frame |
|---|---|
| + | [* icon_note] In order for the new adhesive to properly seal, you must remove ***all*** the old adhesive ''and its residue''. |
| + | [* black] Use the flat end of a spudger to scrape up and remove all the old adhesive from the frame. |
| + | [* icon_note] If you're having trouble, apply a few drops of highly-concentrated (greater than 90%) isopropyl alcohol to the adhesive and scrape it up. |
Image 1
No previous image
Added
Image 2
No previous image
Added