Skip to main content

Changes to Step #9

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Tilt the top of the logic board away from the rear case.
-[* black] Lift the logic board straight up and out of the iMac. Be careful not to snag the board on any of the rear case's screw posts.
-[* icon_note] The I/O boards at the bottom of the logic board will be the greatest challenge, go slowly and pull gently to avoid damage.
+[* black] Tilt the top of the logic board away from the rear enclosure.
+[* black] Lift the logic board straight up and out of the iMac.
+[* icon_caution] Be careful not to snag the board on any of the rear case's screw posts.
+[* icon_note] The I/O boards at the bottom of the logic board will be the greatest challenge. It is recommended to pull gently to avoid any damage.