Skip to main content

Changes to Step #9

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

-[* black] Tilt the logic board slightly forward.
-[* black] Lift the logic board straight up and out of the iMac. Be careful not to snag on any of the screw posts attached to the inside of the rear case.
+[* black] Tilt the top of the logic board away from the rear case.
+[* black] Lift the logic board straight up and out of the iMac. Be careful not to snag the board on any of the rear case's screw posts.
+[* icon_note] The I/O boards at the bottom of the logic board will be the greatest challenge, go slowly and pull gently to avoid damage.